NeoDen K1830 PCB Khetha le ho Beha Mochini

Tlhaloso e Khutšoanyane:

NeoDen K1830 PCB e khethang le ho beha sebaka seo mochini o khethang ho sona se fepa ka pneumatic se ka lekoa ka bohona le ka potlako, ho netefatsa ts'ebetso e bonolo le ts'ebetso e phahameng.


Lintlha tsa Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

NeoDen K1830 PCB Khetha le ho Beha Mochini video

NeoDen K1830 PCB Khetha le ho Beha Mochini

 

 

Likaroloana

1. Qeto e phahameng le tsamaiso ea lik'hamera ea lebelo le phahameng e ntlafatsa lebelo la kakaretso la mochine.

2. Khokahano ea puisano ea Ethernet bakeng sa maeto ohle a mats'oao a kahare a etsa hore mochini o sebetse o tsitsitse ebile o tenyetsehe.

3. PCB sebaka ka calibrated ka tsela e iketsang le hang-hang, ho ipapisitsoe le kopo e nepahetseng le e itseng ea ho bea.

NeoDen SMT Pick & Place Machine

Tlhaloso

Lebitso la sehlahisoa:NeoDen K1830 PCB Khetha le ho Beha Mochini

Mohlala:NeoDen K1830

Bophara ba theipi:8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm

Bokhoni ba Terene ea IC: 10

Karolo e nyane haholo:0201 (phepelo ea elektroniki)

Likarolo Tse Sebeletsang:0201, IC e hlakileng, Karolo ea Led, Diode, Triode

Boholo ba Bophahamo ba Karolo:18mm

Boholo ba PCB bo sebetsang:540mm*300mm (1500 Optinal)

Phepelo ea motlakase:220V, 50Hz (e fetolehang ho 110V)

Mohloli oa moea:0.6MPa

NW/GW:280/360Kgs

Lintlha tsa Sehlahisoa

nozzle

Lihlooho tse 8 tse nang le Vision e lumelletsoe

Potoloho: +/-180 (360)

Lebelo le Phahameng la ho Beha: 16,000 CPH

mofepi

66 Reel theipi feeders

Beakanya ka tsela e iketsang le ka potlako

Netefatsa ts'ebetso e bonolo le ts'ebetso e phahameng

pono

Lik'hamera tsa tšoaea habeli

Betere calibration

E ntlafatsa lebelo le akaretsang la mochini

koloi

Khanna Motor

Panasonic Servo Motor A6

Etsa hore mochine o sebetse hantle haholoanyane

khomphuta

Pontšo e phahameng-tlhaloso

Pontšo ea boholo: 12 inch

E etsa hore mochini o be bonolo ho o sebelisa

kganya

Leseli la temoso

Mmala o hararo wa kganya

Moqapi o motle le o motle oa pontshi

Haeba o hloka, ka kopo ikutloe u lokolohile ho ikopanya le rona bakeng sa tlhaiso-leseling e batsi.

Litlhahiso mabapi le ts'ebetso ea tlhahiso

1. Tiisetso ea karolo ea pele: netefatsa karolo ea karolo le polarity, boemo ba ho khetha karolo le boemo ba ho phahamisa.

2. Qala tlhahiso ka mor'a ho netefatsa khatiso ea solder paste le boemo ba mocheso.

 

Khaola phepelo ea motlakase ka mor'a hore sistimi e tima.

Boloka mochini o hloekile, tlhokomelo ea letsatsi le letsatsi ea li-nozzles e netefatsa ts'ebeliso e phahameng.

Mabapi le rona

Feme

Fektheri ea NeoDen

Lihlopheng tse 3 tse fapaneng tsa R&D tse nang le kakaretso ea lienjineri tse 25+ tsa litsebi tsa R&D, ho netefatsa tsoelopele e betere le e tsoetseng pele le boqapi bo bocha.

Ba nang le boiphihlelo le ba hloahloa ba tšehetso ea Senyesemane le lienjiniere tsa litšebeletso, ho netefatsa karabelo e potlakileng nakong ea lihora tse 8, tharollo e fana ka nako ea lihora tse 24.

E ikhethang har'a bahlahisi bohle ba Machaena ba ngolisitseng le ho amohela CE ke TUV NORD.

Setifikeiti

Setifikeiti

Pontšo

pontsho
NeoDen K1830 mohala o felletseng oa tlhahiso ea SMT

LBH

Q1:A na nka etela feme ea hau?

A: Ka mekhoa eohle, re amohela ka mofuthu ho fihla ha hao, Pele u tloha naheng ea heno, ka kōpo re tsebise.

Re tla u bontša tsela le ho hlophisa nako ea ho u lata haeba ho khonahala.

 

Q2: A na nka kopa ho fetola mokhoa oa ho paka le oa lipalangoang?

A: E, Re ka fetola mokhoa oa ho paka le lipalangoang ho ea ka kopo ea hau, empa u tlameha ho jara litšenyehelo tsa bona tse entsoeng nakong ena le ho ata.

 

Q3:Molemo oa hau ke ofe ha o bapisoa le baphadisani ba hau?

A: (1).Moetsi ea Tšoanelehang

(2).Taolo ea Boleng e Tšepahalang

(3).Theko ea tlhōlisano

(4).Ho sebetsa ka katleho e phahameng (lihora tse 24 * 7)

(5).Tšebeletso e le 'ngoe

Haeba o hloka, ka kopo ikutloe u lokolohile ho ikopanya le rona bakeng sa tlhaiso-leseling e batsi.


  • E fetileng:
  • E 'ngoe:

  • Q1:U rekisa lihlahisoa life?

    A: Khamphani ea rona e sebetsana le lihlahisoa tse latelang:

    Lisebelisoa tsa SMT

    Lisebelisoa tsa SMT: Liphepelo, likarolo tsa Feeder

    Li-nozzle tsa SMT, mochini o hloekisang li-nozzle, filthara ea nozzle

     

    Q2:Nka fumana khotheishene neng?

    A: Re atisa ho qotsa pele ho lihora tse 8 ka mor'a hore re fumane potso ea hau.Haeba u potlakile haholo ho fumana theko, ka kopo re bolelle e le hore re tla nka potso ea hau pele.

     

    Q3:A na nka etela feme ea hau?

    A: Ka mekhoa eohle, re amohela ka mofuthu ho fihla ha hao, Pele u tloha naheng ea heno, ka kōpo re tsebise.Re tla u bontša tsela le ho hlophisa nako ea ho u lata haeba ho khonahala.

    Re romelle molaetsa oa hau:

    Ngola molaetsa wa hao mona mme o re romele wona

    Re romelle molaetsa oa hau: