SMD Pnenmatic Feeder Automatic feeder
SMD Pnenmatic Feeder Automatic feeder
Litlhaloso
Mosebetsi oa phepelo ea SMT ke ho kenya karolo ea SMT ho sephepelo, se fanang ka karolo ea SMT bakeng sa SMT.
Ka mohlala, ho na le PCB e hlokang ho peista ka mefuta e 100 ea likarolo.Ka nako ena, ho hlokahala li-feeders tse 100 ho kenya lisebelisoa ho fepa mochini o ntseng o hola.
Indasteri ea likopo
Indasteri ea lisebelisoa tsa ka tlung, indasteri ea lisebelisoa tsa elektroniki, indasteri ea matla, indasteri ea LED, ts'ireletso, indasteri ea lisebelisoa le limithara, indasteri ea likhokahano, indasteri ea taolo e bohlale, indasteri ea Lintho (IOT) le indasteri ea sesole, jj.
Boholo ba fepa | Sekhahla sa ho fepa |
8mm | 2mm(bakeng sa 0201,0402) |
8mm | 4mm |
12 limilimithara | 4mm |
16 limilimithara | 4mm |
24 limilimithara | 4mm/8mm/12mm/16mm/20mm/24mm (e ka feto-fetoha) |
32 limilimithara | 4mm/8mm/12mm/16mm/20mm/24mm (e ka feto-fetoha) |
44 limilimithara | 4mm/8mm/12mm/16mm/20mm/24mm (e ka feto-fetoha) |
56 limilimithara | 4mm/8mm/12mm/16mm/20mm/24mm (e ka feto-fetoha) |
Tšebeliso
SMD Pnenmatic Feeder e na le tokelo ea molao ebile ea sebetsa bakeng sa mochini oa Neoden4 Pick and Place, ho na le boholo ba 4-- 8mm/ 12mm/ 16mm/ 24mm, 'me sete e 'ngoe le e 'ngoe ea feeder e kenyelletsa 1* lebokose la phepelo le lebokose le 1* la peel.
SMD Pnenmatic Feeder ha e theko e tlase empa e rarahane e laoloang ke microprocessor diyuniti tse pentiloeng li tla theipi peelers.Ho feta moo, sesebelisoa sa vibration (se kenyellelitsoeng) se ka sebetsana le li-tubes tse ka bang 5 tse arohaneng.Sebaka sa sebaka se fumanehang bakeng sa likarolo tse feptjoang ka li-tray le litheipi tse khutšoanyane li itšetlehile ka thepa ea thepa e fumanehang tafoleng.Sebaka sefe kapa sefe sa tafole se ka sebelisoa bakeng sa likarolo tse emetseng ho beoa, kapa bakeng sa boto e ntseng e etsoa.
Fana ka mohala o le mong oa tlhahiso ea kopano ea SMT
Lihlahisoa tse Amanang
LBH
Q1:Nka reka mochini ho uena joang?
A: (1) Ikopanye le rona ka mohala kapa ka e-mail.
(2) Buisana le ho netefatsa theko ea ho qetela , ho romella , mokhoa oa ho lefa le mantsoe a mang.
(3) U romelle invoice ea perfroma 'me u netefatse taelo ea hau.
(4) Etsa tefo ho latela mokhoa o behiloeng ho proforma novoice.
(5) Re lokisa odara ea hau ho latela invoice ea proforma kamora ho netefatsa tefo ea hau e felletseng.Le ho hlahloba boleng ba 100% pele ho romelloa.
(6) Romella odara ea hau ka tsela ea Express kapa ka moea kapa ka leoatle.
Q2:O fana ka lintlafatso tsa software?
A: Bareki ba rekang mochini oa rona, re ka u fa software ea ntlafatso ea mahala bakeng sa hau.
Q3:U rekisa lihlahisoa life?
A: Khamphani ea rona e sebetsana le lihlahisoa tse latelang:
Lisebelisoa tsa SMT
Lisebelisoa tsa SMT: Liphepelo, likarolo tsa Feeder
Li-nozzle tsa SMT, mochini o hloekisang li-nozzle, filthara ea nozzle
Mabapi le rona
Pontšo
Setifikeiti
Feme
Q1:U rekisa lihlahisoa life?
A: Khamphani ea rona e sebetsana le lihlahisoa tse latelang:
Lisebelisoa tsa SMT
Lisebelisoa tsa SMT: Liphepelo, likarolo tsa Feeder
Li-nozzle tsa SMT, mochini o hloekisang li-nozzle, filthara ea nozzle
Q2:Nka fumana khotheishene neng?
A: Re atisa ho qotsa pele ho lihora tse 8 ka mor'a hore re fumane potso ea hau.Haeba u potlakile haholo ho fumana theko, ka kopo re bolelle e le hore re tla nka potso ea hau pele.
Q3:A na nka etela feme ea hau?
A: Ka mekhoa eohle, re amohela ka mofuthu ho fihla ha hao, Pele u tloha naheng ea heno, ka kōpo re tsebise.Re tla u bontša tsela le ho hlophisa nako ea ho u lata haeba ho khonahala.