SMT Khetha le ho Bea Thepa ea ho Khetha le ho Beha Mochini

Tlhaloso e Khutšoanyane:

Mochini oa ho khetha le ho beha lisebelisoa tsa SMT o sebetsa ho lik'hamera tse tsitsitseng haholo, tse nang le matšoao a habeli ho fihla ho li-feeders tsa pheletso bakeng sa maemo a betere.


Lintlha tsa Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

Re na le bareki ba bangata ba lihlopha tse ntle haholo ho bapatsa marang-rang, QC, le ho sebetsana le mefuta ea mathata a thata ha re ntse re le tseleng ea tlhahiso ea mochini oa ho khetha le ho beha mochini oa Pick and Place Machine, Re latela molao oa "Services of Standardization, ho kopana le Litlhoko tsa Bareki”.
Re na le bareki ba bangata ba lihlopha tse ntle ba ipabolang haholo khoebong ea marang-rang, QC, le ho sebetsana le mefuta ea mathata a thata ha re ntse re le tseleng ea tlhahiso eaMochini oa Chaena oa ho Khetha le ho Beha Sebaka, Bukana ea ho Khetha le ho Beha Mochini, Mochini oa ho Beha Smd, Ka moea oa "boleng bo phahameng ke bophelo ba k'hamphani ea rona;botumo bo botle ke motso oa rona”, re tšepa ka tieo ho sebelisana le bareki ba tsoang lapeng le kantle ho naha mme re na le tšepo ea ho theha kamano e ntle le uena.
Mochini oa ho khetha le ho beha SMT o nang le li-nozzles tse 8, mochini oa SMT o lebelo haholo.

NeoDen K1830 SMT khetha othomathike le ho beha video ea mochini

NeoDen K1830 SMT mochine oa ho khetha le ho beha sebaka

Tlhaloso

Lebitso la sehlahisoa:NeoDen K1830 SMT mochine oa ho khetha le ho beha sebaka

Mohlala:NeoDen K1830

Bophara ba theipi:8mm, 12mm, 16mm, 24mm, 32mm, 44mm,56mm

Bokhoni ba Terene ea IC: 10

Karolo e nyane haholo:0201 (phepelo ea elektroniki)

Likarolo Tse Sebeletsang:0201, Fine-pitch IC, Led Component, Diode, Triode

Boholo ba Bophahamo ba Karolo:18mm

Boholo ba PCB bo sebetsang:540mm*300mm (1500 Optinal)

Phepelo ea motlakase:220V, 50Hz (e fetolehang ho 110V)

Mohloli oa moea:0.6MPa

NW/GW:280/360Kgs

Lintlha tsa Sehlahisoa

nozzle

Lihlooho tse 8 tse nang le Vision e lumelletsoe

Potoloho: +/-180 (360)

Ho nepahala ha ho beoa ka lebelo le phahameng

mofepi

66 Reel theipi feeders

Beakanya ka tsela e iketsang le ka potlako

Netefatsa ts'ebetso e bonolo le ts'ebetso e phahameng

pono

Lik'hamera tsa tšoaea habeli

Betere calibration

E ntlafatsa lebelo le akaretsang la mochini

koloi

Khanna Motor

Panasonic Servo Motor A6

Etsa hore mochine o sebetse hantle haholoanyane

khomphuta

Pontšo e phahameng-tlhaloso

Pontšo ea boholo: 12 inch

E etsa hore mochini o be bonolo ho o sebelisa

kganya

Leseli la temoso

Mmala o hararo wa kganya

Moqapi o motle le o motle oa pontshi

Lisebelisoa tse tloaelehileng

1. Lebokose la Lisebelisoa 1 Pc 10. Theipi e khomarelang ka mahlakoreng a mabeli(A4) Lik'hilograma tse 2
2. Sehokelo sa peipi ea moea(10-8) 1 Pc 11. PCB ea setšoantšo 1 Pc
3. Sehokedi sa peipi ya moya(12-10) 1 Pc 12. Mokotla oa faele 1 Pc
4. JIEKE Allen wrench Set 1 Pc 13. Toeba le terei ea keyboard 1 Pc
5. Wrench e bulehileng (22-24) 1 Pc 14. Lekola Boemo 1 Pc
6. Bula sepane (12-14) 1 Pc 15. Karete ea Tiisetso 1 Pc
7. Cross screwdriver(6*100) 1 Pc 16. Setifikeiti 1 Pc
8. 8G Flash Drive 1 Pc 17. Bukana ea Mosebelisi 1 Pc
9. PCB Positioning Block 9 likhomphutha 18. Nozzle Lik'hilograma tse 10

Tšebeletso ea Rōna

1. Tsebo e ntle marakeng a fapaneng a ka finyella litlhoko tse khethehileng.

2. Moetsi oa sebele ea nang le fektheri ea rona e teng Huzhou, Chaena.

3. Sehlopha se matla sa botekgeniki se etsa bonnete ba hore se hlahisa lihlahisoa tsa boleng bo holimo.

4. Tsamaiso e khethehileng ea ho laola litšenyehelo e netefatsa ho fana ka theko e ntle ka ho fetisisa.

5. Boiphihlelo bo ruileng sebakeng sa SMT.

Papiso ea lihlahisoa tse tšoanang

Mochine oa SMT

Haeba o hloka, ka kopo ikutloe u lokolohile ho ikopanya le rona bakeng sa tlhaiso-leseling e batsi.

LBH

Q1:O na le tšebeletso ea morao-rao?

A: E, tšebeletso e ntle ka mor'a ho rekisa, ho sebetsana le tletlebo ea bareki le ho rarolla bothata ho bareki.

 

Q2:Na ho na le lihlahisoa tse lekiloeng pele li romelloa?

A: E, ho joalo.Lebanta la rona la conveyor kaofela re tla ba 100% QC pele re romelloa.Re leka sehlopha se seng le se seng letsatsi le leng le le leng.

 

Q3:A na nka etela feme ea hau?

A: Ka mokhoa oohle, re amohela ka mofuthu ho fihla ha hao, Pele u tloha naheng ea heno, ka kōpo re tsebise.Re tla u bontša tsela le ho hlophisa nako ea ho u lata haeba ho khonahala.

Mabapi le rona

Feme

Setifikeiti

fektheri
Setifikeiti

Pontšo

pontsho

Haeba o hloka, ka kopo ikutloe u lokolohile ho ikopanya le rona bakeng sa tlhaiso-leseling e batsi.

Re na le bareki ba seng bakae ba hloahloa ba hloahloa haholo khoebong ea marang-rang, QC, le ho sebetsana le mefuta ea mathata a thata ha re ntse re le mothating oa ho hlahisa lihlahisoa tsa boleng bo holimo China IC Card Inlay Sheets IC Module Pick and Place Machine, Re khomarela molao-motheo oa " Services of Standardization, ho kopana le Litlhoko tsa Bareki”.
Boleng bo phahamengMochini oa Chaena oa ho Khetha le ho Beha Sebaka, Mochini oa ho Beha SMD, Ka moea oa "boleng bo phahameng ke bophelo ba k'hamphani ea rona;botumo bo botle ke motso oa rona”, re tšepa ka tieo ho sebelisana le bareki ba tsoang lapeng le kantle ho naha mme re na le tšepo ea ho theha kamano e ntle le uena.


  • E fetileng:
  • E 'ngoe:

  • Q1:U rekisa lihlahisoa life?

    A: Khamphani ea rona e sebetsana le lihlahisoa tse latelang:

    Lisebelisoa tsa SMT

    Lisebelisoa tsa SMT: Liphepelo, likarolo tsa Feeder

    Li-nozzle tsa SMT, mochini o hloekisang li-nozzle, filthara ea nozzle

     

    Q2:Nka fumana khotheishene neng?

    A: Re atisa ho qotsa pele ho lihora tse 8 ka mor'a hore re fumane potso ea hau.Haeba u potlakile haholo ho fumana theko, ka kopo re bolelle e le hore re tla nka potso ea hau pele.

     

    Q3:A na nka etela feme ea hau?

    A: Ka mokhoa oohle, re amohela ka mofuthu ho fihla ha hao, Pele u tloha naheng ea heno, ka kōpo re tsebise.Re tla u bontša tsela le ho hlophisa nako ea ho u lata haeba ho khonahala.

    Re romelle molaetsa oa hau:

    Ngola molaetsa wa hao mona mme o re romele wona

    Re romelle molaetsa oa hau: