Mochini oa Teko oa AOI oa Marang-rang

Tlhaloso e Khutšoanyane:

Mochini oa tlhahlobo ea AOI ea inthaneteng o na le botebo bo phahameng ba lense ea telecentric ea masimong, e ka methang manonyeletso a solder ka lehlakoreng la likarolo tse phahameng.MES data docking ho hlokomela feme e bohlale.


Lintlha tsa Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

Mochini oa Teko oa AOI oa Marang-rang

Bonepe bo Phahameng

Mekhoa e mengata ea tlhahlobo ea software, mekhoa e mengata ea ts'ebeliso, sistimi e tsamaeang ka nepo e phahameng

Bokhoni bo Phahameng

Setsi se le seng sa tokiso se tiisa data ea ho sibolloa ha mechini e mengata ea inthanete ho hlokomela taolo le taolo e felletseng ea othomathike.

Tlhaloso

Lebitso la sehlahisoa Mochini oa Teko oa AOI oa Marang-rang
Mohlala ALE
Botenya ba PCB 0.6mm ~ 6mm
Max.Boholo ba PCB (X x Y) 510mm x 460mm
Min.Boholo ba PCB (Y x X) 50mm x 50mm
Max.Lekhalo le ka Tlase 50 limilimithara
Max.Lekhalo le Phahameng 35 limilimithara
Lebelo le tsamayang 1500mm/Sec(Boholo)
Bophahamo ba phetiso ho tloha fatshe 900±30mm
Mokhoa oa ho fetisa Mothati o le Mong
Mokhoa oa ho koala oa PCB Moeli oa ho notlela substrate clamping
Boima ba 'mele 750KG

Likaroloana

tsamaiso ea pono

Litšoantšo tsa Parameters

Khamera: GigE Vision (sebopeho sa marang-rang sa Gigabit)

Qeto: 2448*2048(500 Mega Pixels)

FOV: 36mm * 30mm

Qeto: 15μm

Sistimi ea Lebone: Mohloli oa leseli oa LED o nang le mahlakore a mangata a pota-potileng

Phatlalatso e Felletseng ea Bofokoli ba Pad

Arola pad libakeng tse ngata, sebaka ka seng se na le litšobotsi tsa lihlahisoa tse ntle le tse mpe, beha litekanyetso tse lumellanang tsa ho lemoha ho lekanya.

AOI
AOI1

 

E lumellana le mefuta e fapaneng ea li-pads

Algorithm ea wave soldering e ts'ehetsa libopeho tse fapaneng tsa liphaephe, boemo bo nepahetse haholoanyane.

Khamera e pepeneneng ea lefats'e + lense ea telecentric

Khamera e bonts'ang lefats'e e na le nako ea ponts'o e potlakileng ho feta kh'amera ea shutter,

e seng feela e felisang ketsahalo e hulang ea khamera ea shutter ea roller,

empa hape e eketsa lebelo ka ho feta 30%!

Lense ea telecentric e rarolla bothata ba ho sotha litšoantšo tsa lense e pharaletseng,

'me e ka sebetsana habonolo le ho fumanoa ha mahlakoreng a mahlakoreng a likarolo tse phahameng.

'Me tekong ea linear, teko ea deflection angle, teko ea sebaka, e na le phello e nepahetseng haholoanyane.

Fana ka mohala o le mong oa tlhahiso ea kopano ea SMT

Mabapi le rona

Feme ea Rona

Fektheri ea NeoDen

Lintlha tse potlakileng ka NeoDen

E thehiloe ka 2010 ka basebetsi ba 100+ & 8000+ Sq.m.fektheri ea litokelo tsa thepa e ikemetseng, ho netefatsa tsamaiso e tloaelehileng le ho finyella liphello tse ngata tsa moruo hammoho le ho boloka litšenyehelo.

E na le setsi sa hau sa machining, se kopanyang litsebo, tester le baenjiniere ba QC, ho netefatsa bokhoni bo matla ba ho etsa mechini ea NeoDen, boleng le phano.

Balekane ba 40+ ba lefats'e ba sebetsang Asia, Europe, Amerika, Oceania le Afrika, ho atleha ho sebeletsa basebelisi ba 10000+ lefatšeng lohle, ho netefatsa ts'ebeletso e ntle le e potlakileng ea lehae le karabelo e potlakileng.

Setifikeiti

Setifikeiti

Pontšo

pontsho

Haeba o hloka, ka kopo ikutloe u lokolohile ho ikopanya le rona!

LBH

Q1:Lihlahisoa tsa hau ke life?

Mochini oa A. SMT, AOI, onto ea ho phalla hape, mochini o kenyang PCB, printa ea stensele.

 

Q2:Na nka tseba hore na boema-fofane bo haufi ke bofe ho tsoa k'hamphaning ea hau?haeba ke etela k'hamphani ea hau.

A: Boema-fofane ba Hangzhou ke bo haufi, re amohelehile ho re etela.

 

Q3: Lipehelo tsa hau tsa ho fana ke life?

A: Re amohela EXW, FOB, CFR, CIF, joalo-joalo.

U ka khetha e loketseng ka ho fetisisa kapa e sebetsang hantle bakeng sa hau.


  • E fetileng:
  • E 'ngoe:

  • Q1:U rekisa lihlahisoa life?

    A: Khamphani ea rona e sebetsana le lihlahisoa tse latelang:

    Lisebelisoa tsa SMT

    Lisebelisoa tsa SMT: Liphepelo, likarolo tsa Feeder

    Li-nozzle tsa SMT, mochini o hloekisang li-nozzle, filthara ea nozzle

     

    Q2:Nka fumana khotheishene neng?

    A: Re atisa ho qotsa pele ho lihora tse 8 ka mor'a hore re fumane potso ea hau.Haeba u potlakile haholo ho fumana theko, ka kopo re bolelle e le hore re tla nka potso ea hau pele.

     

    Q3:A na nka etela feme ea hau?

    A: Ka mekhoa eohle, re amohela ka mofuthu ho fihla ha hao, Pele u tloha naheng ea heno, ka kōpo re tsebise.Re tla u bontša tsela le ho hlophisa nako ea ho u lata haeba ho khonahala.

    Re romelle molaetsa oa hau:

    Ngola molaetsa wa hao mona mme o re romele wona

    Re romelle molaetsa oa hau: