Mochini oa Kopano oa NeoDen10 SMD

Tlhaloso e Khutšoanyane:

Mochini oa kopano oa NeoDen10 SMD o phahamisa PCB ka bo eona, o boloka PCB e le boemong bo tšoanang nakong ea ho beoa, ho netefatsa ho nepahala ho phahameng.


Lintlha tsa Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

NeoDen10 SMD Mochine oa Kopano Video

Mochini oa Kopano oa NeoDen10 SMD

Tlhaloso

Lebitso la sehlahisoa:Mochini oa Kopano oa NeoDen10 SMD

Mohlala:NeoDen 10

Bokhoni ba Terene ea IC: 20

Karolo e nyane haholo:0201 (phepelo ea elektroniki)

Likarolo Tse Sebeletsang:0201, IC e hlakileng, Karolo ea Led, Diode, Triode

Boholo ba Bophahamo ba Karolo:16 limilimithara

Boholo ba PCB bo sebetsang:500mm * 300mm (1500 Optinal)

Phepelo ea motlakase:220V, 50Hz (e fetolehang ho 110V)

Mohloli oa moea:0.6MPa

NW:1100Kgs

Lintlha tsa Sehlahisoa

Nozzle

Lihlooho tse 8 tse nang le Vision e lumelletsoe

Potoloho: +/-180 (360)

Ho nepahala ha ho beoa ka lebelo le phahameng

Ea fepang

66 Reel theipi feeders

Beakanya ka tsela e iketsang le ka potlako

Netefatsa ts'ebetso e bonolo le ts'ebetso e phahameng

相机

Lik'hamera tsa tšoaea habeli

Betere calibration

E ntlafatsa lebelo le akaretsang la mochini

koloi

Khanna Motor

Panasonic Servo Motor A6

Etsa hore mochine o sebetse hantle haholoanyane

khomphuta

Pontšo e phahameng-tlhaloso

Pontšo ea boholo: 12 inch

E etsa hore mochini o be bonolo ho o sebelisa

kganya

Leseli la temoso

Mmala o hararo wa kganya

Moqapi o motle le o motle oa pontshi

Tlhaloso

Sehokelo sa mananeo, se bonolo ho sebetsa, se bohlale haholoanyane

1. Tobetsa ho kenya lihokahanyo, e ka khetholla lera le ka holimo / ka tlase;fumana ka bohona laeborari e teng ea karolo ea maoto, laeborari ea maemo a feme ea maoto.

2. Tobetsa ho kenya laeborari ea mehato e ts'oanang, o hloka feela ho eketsa hanngoe, laeborari e teng e ka tsebahatsoa ka bo eona.

3. Ntlafatsa software ea FOC bakeng sa bophelo bohle.

Sensor e nang le tokelo ea molao, ntle le PCB e tloaelehileng, e ka boela ea beha PCB e ntšo ka ho nepahala ho phahameng.

'Mele oa Marbel, boima ba 1100KG, ema o tiile ntle le ho sisinyeha.

Tšebeletso ea Rōna

Re boemong bo botle eseng feela ho u fa mochini oa pnp oa boleng bo holimo, empa hape le ts'ebeletso e ntle ka mor'a thekiso.

Baenjiniere ba koetlisitsoeng hantle ba tla u fa tšehetso efe kapa efe ea tekheniki.

Sehlopha sa baenjiniere ba 10 ba matla ka mor'a ho rekisa se ka araba lipotso le lipotso tsa bareki nakong ea lihora tse 8.

Litharollo tsa litsebi li ka fanoa nakong ea lihora tse 24 ka letsatsi la mosebetsi le matsatsi a phomolo.

Papiso ea lihlahisoa tse tšoanang

Mochine oa SMT

Haeba o hloka, ka kopo ikutloe u lokolohile ho ikopanya le rona bakeng sa tlhaiso-leseling e batsi.

LBH

Q1. Ts'ebeletso ea hau ea thomello ke efe?

A: Re ka fana ka litšebeletso bakeng sa ho tsamaisa likepe, ho kopanya thepa, phatlalatso ea meetlo, ho lokisetsa litokomane tsa ho romela le ho fana ka bongata boema-kepeng ba likepe.

 

Q2. Nako ea ho fana ka tlhahiso ea bongata ke efe?

A: Hoo e ka bang matsatsi a 15-30.

 

Q3. Feme ea hau e hole hakae le boema-fofane le seteishene sa terene?

A: Ho tloha boema-fofane lihora tse ka bang 2 ka koloi, le ho tloha seteisheneng sa terene e ka bang metsotso e 30.

Re ka u lata.

Mabapi le rona

Feme

fektheri

Zhejiang NeoDen Technology Co., LTD., E thehiloe ka 2010, ke moetsi ea hloahloa ea khethehileng ka mochini oa ho khetha le ho beha sebaka sa SMT, onto ea reflow, mochini oa khatiso oa stencil, mohala oa tlhahiso ea SMT le Lihlahisoa tse ling tsa SMT.

Ho fihlela hajoale, re rekisitse mechini e fetang 10,000pcs mme re e romelletse linaheng tse fetang 130 lefats'eng ka bophara, ho theha seriti se setle 'marakeng.

Lihlopheng tse 3 tse fapaneng tsa R&D tse nang le kakaretso ea lienjineri tse 25+ tsa litsebi tsa R&D, ho netefatsa tsoelopele e betere le e tsoetseng pele le boqapi bo bocha.

Litsebi tse nang le tsebo le litsebi tsa tšehetso ea Senyesemane le lienjiniere tsa litšebeletso, ho netefatsa karabelo e potlakileng nakong ea lihora tse 8, tharollo e fana ka lihora tse 24.

Workshop

Setifikeiti

Setifikeiti

Pontšo

pontsho

Haeba o hloka, ka kopo ikutloe u lokolohile ho ikopanya le rona bakeng sa tlhaiso-leseling e batsi.


  • E fetileng:
  • E 'ngoe:

  • Q1:U rekisa lihlahisoa life?

    A: Khamphani ea rona e sebetsana le lihlahisoa tse latelang:

    Lisebelisoa tsa SMT

    Lisebelisoa tsa SMT: Liphepelo, likarolo tsa Feeder

    Li-nozzle tsa SMT, mochini o hloekisang li-nozzle, filthara ea nozzle

     

    Q2:Nka fumana khotheishene neng?

    A: Re atisa ho qotsa pele ho lihora tse 8 ka mor'a hore re fumane potso ea hau.Haeba u potlakile haholo ho fumana theko, ka kopo re bolelle e le hore re tla nka potso ea hau pele.

     

    Q3:A na nka etela feme ea hau?

    A: Ka mokhoa oohle, re amohela ka mofuthu ho fihla ha hao, Pele u tloha naheng ea heno, ka kōpo re tsebise.Re tla u bontša tsela le ho hlophisa nako ea ho u lata haeba ho khonahala.

    Re romelle molaetsa oa hau:

    Ngola molaetsa wa hao mona mme o re romele wona

    Re romelle molaetsa oa hau: