NeoDen K1830 khetha le ho beha mochini o ikemetseng

Tlhaloso e Khutšoanyane:

NeoDen K1830 mochini oa ho khetha le ho beha sebaka o na le qeto e phahameng mme sistimi ea kh'amera ea lebelo le holimo e ntlafatsa lebelo la mochini kaofela.


Lintlha tsa Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

NeoDen K1830 khetha le ho beha video ea mochini o ikemetseng

NeoDen K1830 khetha le ho beha mochini o ikemetseng

Tlhaloso

Lebitso la sehlahisoa NeoDen K1830 khetha le ho beha mochini o ikemetseng
Nozzle Q'ty  8
Reel Tape Feeder Q'ty(Max)  66 (Motlakase / Pneumatic) 
IC Tray Feeder Q'ty  10 (Ka Tatelano) 
Boholo ba PCB  540*300mm(Ka Mohato o le Mong) 
Boholo ba Karolo e Nyane  0201(Sephepelo sa Motlakase sea Fumaneha)
Liphutheloana tsa IC  QFP, SSOP, QFN, BGA 
Ho nepahala ha ho beoa  0.01 limilimithara 
Max Component Height  18mm
Lebelo le Phahameng la ho Beha  16,000CPH
Kamohelo ea Karolo  High Resolution Flying Vision Camera System
PCB Fiducial Recognition  Khamera ea Letšoao le Phahameng la Precision  
PCB Loading  Sistimi e hokahaneng ea Methati e 3 ea Internal Conveyor 
Tataiso ea Phetiso ea PCB  Ka ho le letšehali→ Ka ho le letona 
Phepelo ea Moea  > 0.6MPa 
Matla  500W
Palo ea li-volts  220V/50HZ & 110V/60HZ
Boima bo kahare  280kgs
Boima bo felletseng  360kgs
Litekanyo tsa Mochini  1288×1062×1291mm(Ntle le Leseli la mebala e meraro)
Pack Dimensions 1420×1220×1665mm

Lintlha tsa Sehlahisoa

8 nozzles

 

Li-nozzles tse 8 tsa lebelo le phahameng

1-8 Li-Nozzles tse Kopantsoeng tse netefatsang ho beoa ho nepahetseng ho ka phetoa ka lebelo le phahameng.

2-Mochine o sebetsa ho sistimi e sebetsang ea Linux e tsitsitseng haholo le e sireletsehileng.

Sistimi ea pono

1-Lik'hamera tse tšoaeang habeli ho fihla ho li-feeders tsa pheletso bakeng sa maemo a betere.

2-Tlhaloso e phahameng le sistimi ea kh'amera ea lebelo le holimo e ntlafatsa lebelo le akaretsang la mochini.

tsamaiso ea khamera
Bafepi

 

66 Reel theipi feeders

1-Loop e koetsoeng ea sistimi ea taolo ea Servo e nang le maikutlo e etsa hore mochini o sebetse ka nepo haholoanyane.

2-Sebaka sa ho khetha sebaka sa phepelo ea moea se ka lekoa ka bohona le ka potlako, ho netefatsa ts'ebetso e bonolo le ts'ebetso e phahameng.

Lintlha tsa motheo tsa Feeder

1. Tlosa: hang ha e khethiloe, likarolo tsohle tse fepelong ena li tla tloloa.

2. Phapanyetsano ea lijo: mosebetsi ona o ka sebelisoa haeba tepi leha e le efe ea reel e kentsoe sebakeng se fosahetseng kapa se sa lokelang.Khetha mochini o fepang / IC tray feeder eo u hlokang ho e fapanyetsana, ebe lintlha tse amanang le phepelo li tla amahanngoa le phepelo e fetotsoeng / IC tray feeder.

3. Ho lieha ha sebaka: Bakeng sa likarolo tse khethehileng tse kang IC e kholo le capacitor e kholo, ho molemo ho beha nako e telele sebakeng sa ho lieha ho etsa bonnete ba hore nozzle e ntse e ka monya motsoako ka mokhoa o tsitsitseng nakong ea motsamao oa ho e beha holim'a boto.

Haeba u hloka, ka kopo u se ke oa tsilatsila ho romella potso ea hau.

Fana ka mohala o le mong oa tlhahiso ea kopano ea SMT

Mohala oa Sehlahisoa2

Lihlahisoa tse Amanang

LBH

Q1:O fana ka lintlafatso tsa software?

A: Bareki ba rekang mochini oa rona, re ka u fa software ea ntlafatso ea mahala bakeng sa hau.

 

Q2:Ke lekhetlo la pele ke sebelisa mochini oa mofuta ona, na ho bonolo ho o sebetsa?

A: Re na le bukana ea mosebelisi ea Senyesemane le video e tataisang ho u ruta mokhoa oa ho sebelisa mochini.Haeba o ntse o na le potso, pls ikopanye le rona ka lengolo-tsoibila / skype / whatapp / mohala / trademanager tšebeletso ea inthaneteng.

 

Q3:U rekisa lihlahisoa life?

A: Khamphani ea rona e sebetsana le lihlahisoa tse latelang:

Lisebelisoa tsa SMT

Lisebelisoa tsa SMT: Liphepelo, likarolo tsa Feeder

Li-nozzle tsa SMT, mochini o hloekisang li-nozzle, filthara ea nozzle

Mabapi le rona

Pontšo

pontsho

Setifikeiti

Setifikeiti sa 1

Feme

Khampani

Haeba u hloka, ka kopo u se ke oa tsilatsila ho romella potso ea hau.


  • E fetileng:
  • E 'ngoe:

  • Q1:U rekisa lihlahisoa life?

    A: Khamphani ea rona e sebetsana le lihlahisoa tse latelang:

    Lisebelisoa tsa SMT

    Lisebelisoa tsa SMT: Liphepelo, likarolo tsa Feeder

    Li-nozzle tsa SMT, mochini o hloekisang li-nozzle, filthara ea nozzle

     

    Q2:Nka fumana khotheishene neng?

    A: Re atisa ho qotsa pele ho lihora tse 8 ka mor'a hore re fumane potso ea hau.Haeba u potlakile haholo ho fumana theko, ka kopo re bolelle e le hore re tla nka potso ea hau pele.

     

    Q3:A na nka etela feme ea hau?

    A: Ka mekhoa eohle, re amohela ka mofuthu ho fihla ha hao, Pele u tloha naheng ea heno, ka kōpo re tsebise.Re tla u bontša tsela le ho hlophisa nako ea ho u lata haeba ho khonahala.

    Re romelle molaetsa oa hau:

    Ngola molaetsa wa hao mona mme o re romele wona

    Re romelle molaetsa oa hau: